Vertical Blinds use rotating fabric vanes that hang from a top track, often paired with a sheer backing layer for soft, two-mode light control.
They handle the wide sliding doors and balcony openings common in Singapore condos better than venetian or roller systems, and draw across the track like a curtain when fully open. The vanes rotate independently, letting you direct, filter, or block light without operating the entire blind.
Vertical blinds with an integrated sheer layer are also referred to as vertical sheers, ripple curtains, or dream blinds.
Vanes traverse along a top track like a curtain, handling the wide sliding doors and balcony openings common in Singapore condos better than venetian or roller systems.
Most modern vertical blinds combine opaque vanes with a sheer backing layer. Soft daytime light when open, clean privacy when closed.
Each vane rotates independently, letting you direct or filter incoming light without raising or moving the blind across the track.
Stacks tightly at one or both ends of the track when fully drawn open, leaving the door or window unobstructed.
Most condo apartments in Singapore include a sliding glass door opening onto a balcony or service yard, often spanning 2.4 to 3.6 metres. Vertical blinds are particularly suited to these openings: the vanes traverse the entire span on a single track and stack compactly to one side when fully open, leaving the doorway clear. Roller blinds become unwieldy at these widths, and venetian blinds tend to sag.
HDB living-room windows are typically casement aluminium types ranging from 1.8 to 2.4 metres wide. Vertical blinds suit these wider rectangular openings, particularly where a soft sheer-layer effect is wanted alongside daytime privacy.
With the vanes open, the sheer backing layer filters daylight into the room. With the vanes rotated closed, the opaque or dimout fabric provides privacy and reduces glare. The horizontal-traverse mechanism makes vertical blinds the best choice for very wide windows and sliding doors, where roller- style alternatives become unwieldy.
Opaque vanes block most external light when closed; the sheer backing layer filters daylight when the vanes are open. The standard layered configuration for living rooms and master bedrooms.
Vanes reduce glare and provide strong daytime privacy without darkening the room. The sheer backing softens light when the vanes are open. A balanced choice for living and dining areas.
Solid opaque vanes only, no sheer layer. A simpler, more traditional configuration suited to home offices, utility rooms, or minimalist interiors that do not need the layered effect.
Many Singapore condos are oriented so that one face takes direct afternoon sun. Where this face includes a sliding door, vertical blinds with a dimout or blackout vane plus sheer layer let you cut glare and heat in the afternoon while preserving the layered sheer look in the morning.
Polyester-blend vanes used in our range hold their shape in Singapore's 70 to 90 percent year-round humidity and do not absorb moisture the way heavier curtain fabrics can. Routine cleaning is a wipe-down with a damp cloth or vacuum on a low setting; the vanes can be removed individually for deeper cleaning if needed.
The most common application. Dimout-with-sheer or blackout-with- sheer vertical blinds give you both daytime softness and evening privacy on a single mechanism that handles the full span without sagging.
For rectangular HDB living-room windows wider than about 2 metres, vertical blinds are often a cleaner solution than splitting the span between multiple roller or venetian blinds. The traverse mechanism keeps the look continuous.
Opaque-only vertical blinds (without sheer) suit home offices where a simpler, more functional treatment is preferred. The rotating vanes let you cut monitor glare without raising the blind.
Less common in bedrooms because verticals do not seal as tightly as a blackout curtain or roller blind, so a small amount of light leaks between vanes even when closed. They can work as a layered system alongside a blackout treatment, but blackout curtains or roller blinds are the more typical bedroom choice.
For sliding-door installations, the track is usually wall-mounted above the door frame or recessed into a false-ceiling pelmet. Allow at least 100 millimetres of pelmet depth for a single track, more if a curtain layer is being added in front. The track length typically extends 100 to 200 millimetres beyond the door opening on the stack side, so the vanes clear the doorway when fully drawn open.
Vertical blinds can stack to one side or split-stack to both ends of the track. The choice depends on which side of the sliding door is in active use and where the open vanes will be least obtrusive. This is decided during measurement and affects both the track length and the layout of the vanes.
Motorised vertical blinds need a 230V power point near one end of the track. For wide sliding-door installations, motorisation is increasingly common because manual traverse on long tracks can be heavy. Plan the power point during the renovation electrical phase if possible.
Vertical blinds are the right choice for sliding doors, very wide windows, and openings where the treatment needs to traverse horizontally. Roller and venetian blinds become impractical or visually awkward at those widths.
Compared with a sheer-plus-blackout layered curtain system, vertical blinds use a single mechanism instead of two tracks, giving a slimmer head-rail profile. Curtains still win on visual softness and full-blackout sealing, which is why bedrooms more often use curtains than vertical blinds.
Vertical blinds do not provide a true blackout effect. They are also less suited to small or narrow windows, where the vanes lose their visual rhythm. For bedrooms, AV rooms, and any space where consistent darkness matters, a blackout curtain or roller blind is the better choice.
More on choosing between blind types and fabric configurations.
Traditional vertical blinds use individual opaque or dimout vanes. Vertical sheers combine rotating vanes with a sheer backing or connecting layer for a softer daytime appearance. Both traverse sideways on a top track, but their light-filtering effect is different.
Yes. Their sideways movement follows the operation of a sliding door, and the vanes can stack beside the active opening. The stack direction and track extension should be planned around the door panel that is used most often.
Not completely. Even with blackout-grade vanes, light can enter between the vanes and around the track edges. Bedrooms requiring consistent darkness are usually better served by blackout curtains or a suitably specified roller-blind system.
Yes. A motorised system can control the sideways traverse and, depending on the selected hardware, vane rotation. Power location, track length and the desired control method should be planned before installation.
Routine dust can be removed with a low-suction vacuum or a soft damp cloth, following the fabric care instructions. Individual vanes can generally be detached for deeper cleaning or replacement without changing the complete track.
Backed by PFE Technologies
A Singapore company established in 1978
Assembled in Singapore
Motorised systems built in our own workshop
1-Year Warranty
Covers tracks, motors, and blinds hardware
Showroom Open Daily
24 Keong Saik Road, 10am to 7pm
